Skip to content
img
Sika Material - DRY MORTAR ADDITIVE

Browse Sika Materials to view Technical and safety data sheets

Sika® ViscoCrete®-111 P

High-performance superplasticizer Sika® ViscoCrete®-111 P is a high-performance superplasticizer and water reducer in powder form based on Sika® ViscoCrete® polycarboxylate (PCE) polymer technology. Very long slump life and open time Slow adsorption Good flow and self-levelling behaviour

Download Data Sheet

Sika® ViscoCrete®-125 P

High-Performance Superplasticizer Sika® ViscoCrete®-125 P is a high-performance, superplasticizer and water reducer in powder form, based on Sika® ViscoCrete® polycarboxylate (PCE) polymer technology. Increased strength development Medium to fast adsorption Good slump life and open time

Download Data Sheet

Sika® ViscoCrete®-150 P

High-Performance Superplasticizer Sika® ViscoCrete®-150 P is a high-performance superplasticizer and water reducer in powder form based on Sika® ViscoCrete® polycarboxylate polymer technology. High water reduction capacity Low influence on binder hydration Compatible with other additives (e.g. citric acid)

Download Data Sheet

Sika® ViscoCrete®-225 P

High-Performance Superplasticizer /HRWRA Sika® ViscoCrete®-225 P is a high-performance superplasticizer and water reducer in powder form based on Sika® ViscoCrete® polycarboxylate polymer technology. High water reduction capacity High sulphate tolerance Compatible with other additives, e.g. citric acid

Download Data Sheet

Sika® ViscoCrete®-430 P

High-Performance Superplasticizer Sika® ViscoCrete®-430 P is a high-performance, superplasticizer and water reducer in powder form, based on Sika® ViscoCrete® polycarboxylate (PCE) polymer technology. Very high initial flow Robustness regarding different sand qualities Very good flow and self-levelling behaviour

Download Data Sheet

Sika® ViscoCrete®-510 P

High-performance superplasticizer Sika® ViscoCrete®-510 P is a high-performance superplasticizer and water reducer in powder form, based on Sika® ViscoCrete® polycarboxylate (PCE) polymer technology. Universally applicable for all binder systems Strong water reduction Short mixing times due to fast adsorption

Download Data Sheet

Sika® ViscoCrete®-520 P

High-performance superplasticizer Sika® ViscoCrete®-520 P is a high-performance superplasticizer and water reducer in powder form based on Sika® ViscoCrete® polycarboxylate (PCE) polymer technology. High performance in binder systems with pH < 11 Very fast adsorption also at low temperatures Compatible with other additives (e.g. citric acid)

Download Data Sheet

Sika® ViscoCrete®-30 PowerPack

Superplasticizer compound for Calcium Sulphate Flow Screed Sika® ViscoCrete®-30 PowerPack is a powdery superplasticizer compound based on Sika® ViscoCrete® Polycarboxylate-Polymer-Technology especially for flow screed systems. Very robust with different sand and binder qualities Very good flow and self-levelling behaviour High sulphate tolerance

Download Data Sheet

Sika® PowerPack-10 MF

Superplasticizer compound for dry mortar Sika® PowerPack-10 MF is a powdery superplasticizer compound based on Sika® ViscoCrete® polycarboxylate polymer technology especially made for use in low emission cementitious and calcium sulphate based dry mortars. Easy to dose into the dry mix mortar No additional air entrainment Free of formaldehyde and ammonia

Download Data Sheet

Sika® PowerPack-15 MF

Superplasticizer compound for low emission dry mortars Sika® PowerPack-15 MF is a powdery superplasticizer compound based on Sika® ViscoCrete® polycarboxylate polymer technology especially made for use in low emission dry mortars, e.g. anhydrite flow screeds. Easy to dose into the dry mix mortar Very long slump life and open time Very good flow and self-levelling behaviour

Download Data Sheet

Sika® PowerPack-20 MF

Superplasticizer compound for Dry Motar Sika® PowerPack-20 MF is a powdery superplasticizer compound based on Sika® ViscoCrete® polycarboxylate polymer technology especially made for use in low emission dry mortars to replace Melamine. Easy to dosage in the dry mortar mixture Significant water reduction possible Reduced mixing time due to very rapid adsorption

Download Data Sheet

Sika® PowerPack-25 MF

Superplasticizer compound for low emission Flow Screeds Sika® PowerPack-25 MF is a powdery superplasticizer compound based on Sika® ViscoCrete® polycarboxylate polymer technology especially made for use in low emission anhydrite flow screeds. Very long slump life and open time Easy to dosage in the dry mortar mixture Stabilizing influence onto the screed mix

Download Data Sheet

SikaRapid®-110 P

Powdered hardening accelerator for cementitious mortars SikaRapid®-110 P is used as a hardening accelerator for cementitious dry mortars e.g. lime-cement plaster, masonry mortar, repair-and installation mortar, CSA-based ternary self leveller, adhesive- and reinforcing mortars or spray mortars. Higher early strength first 1 -3 hours Acts on aluminate phase Low influence on final strength

Download Data Sheet

SikaRapid®-800 P

Hardening Accelerator SikaRapid®-800 P is a hardening accelerator in powder form for cementitious dry mortar and concrete. SikaRapid®-800 P develops after a few hours very high strengths. Good strength development even below 10°C Adjustable workability time 10 – 50 min Small gap between the beginning and end of the setting

Download Data Sheet

Sika® Sigunit®-39 AF

Powdery alkali-free setting accelerator for shotcrete Sika® Sigunit®-39 AF is an alkali-free setting accelerator for dry-mix shotcrete in powder form. Alkalifree fast cement setting Very economical and efficient Lower rebound during application

Download Data Sheet

Sika® Sigunit®-49 AF

Alkali-free accelerating admixture in powder form Sika® Sigunit®-49 AF is a non-toxic, alkali-free accelerator in powder form for shotcrete in the dry spray process. Alkalifree fast cement setting Minimum strength loss in the spray concrete Accredited for the French railways

Download Data Sheet

Sika® Sigunit®-59 AF

Powdery alkali-free setting accelerator for shotcrete Sika® Sigunit®-59 AF is an alkali-free setting accelerator for dry-mix shotcrete in powder form. Alkalifree fast cement setting Especially for CO2 reduced cement Minimum strength loss in the spray concrete

Download Data Sheet

Sika® Beschleuniger BE 2

Powdered setting accelerator for shotcrete Sika® Beschleuniger BE 2 is an alkaline setting accelerator used for sprayed concrete in dry spraying method. Alkaline fast cement setting With less requirement for final strength strong acceleration with low dosage

Download Data Sheet

Retardan®-200 P

Retarder for calcium sulphate (Gypsum) based binders Retardan®-200 P is a highly efficient set retarder in powder form for calcium sulphate (Gypsum) based binder systems. Extremly efficient at very low dosages No reduction in the final strength Ecologically safe and EC1 plus suitable

Download Data Sheet

Retardan®-2010 P

Retarder for calcium sulphate (Gypsum) based binders Retardan®-2010 P is a high-performance set retarder in powder form for calcium sulphate (Gypsum) based binder systems. Very efficient at low dosages Uniform and proven quality Ecologically safe and EC1 plus suitable

Download Data Sheet

Retardan®-2025 P

Retarder for calcium sulphate (Gypsum) based binders Retardan®-2025 P is a high-performance set retarder in powder form for calcium sulphate (Gypsum) based binder systems. No reduction in the final strength Compatible with other additives Ecologically safe and EC1 plus suitable

Download Data Sheet

Retardan® P

Retarder for calcium sulfate based binders Retardan® P is a high-performance set-retarder in powder form for use with calcium sulphate (Gypsum) based binders. Highly effective set retarder high pH-value tolerance No reduction in the final strength

Download Data Sheet

SikaTard®-900 P

Retarder for cementitious binder systems SikaTard®-900 P is a high-performance set retarder in powder form for cement and cement-gypsum based binder systems. Very efficient retardation at low dosage Works with all cement types Positive effect on consistency

Download Data Sheet

SikaControl® AER-200 P

Reactive Air Entraining Admixture Powder SikaControl® AER-200 P has been designed and formulated to deliberately introduce air into mortar or concrete in the form of evenly sized and uniformly distributed micro air voids. Improvement of the freeze/thaw resistance High robstness in changes of aggregates No influence of mixing time on airentrainment

Download Data Sheet

Sika® DSM-A3

Air Entraining Admixture Powder for Dry Mortar Sika® DSM-A3 is a powdered air entraining admixture for use in masonry mortar. It meets the requirements of EN 934-3. Improves frost resistance capabilities Improves workability Reduces bleed

Download Data Sheet

Sika® Stabilizer-165

Viscosity modifier for self-compacting concrete Sika® Stabilizer-165 is a viscosity modifier in powder form. It is used to reduce or prevent bleeding and segregation of self-compacting concrete. Source-related fluctuations e. g. in water content are compensated by the viscosity modifier. Reducing water mobility Higher robustness for bad sands Better pumpability

Download Data Sheet

Sika® UW Compound-100

Stabilizer for underwater concrete and grouting mortar according to EVU 1990 Sika® UW Compound-100 is used to prevent separation of fresh concrete in direct contact with water. This underwater concrete can therefore fall freely and unprotected through the water. Improved internal cohesion More homogeneous mixture Lower internal friction between cement and aggregates

Download Data Sheet

Fibercast®-500 6mm

Micro-polymer fibre for utilisation in mortar and concrete / pourable Fibercast®-500 6mm is a special form of a synthetic micro-reinforcement. The typical application of Fibercast®-500 6mm in mortar and concrete results in increased cohesion and stability in fresh concrete. Fibercast®-500 6mm creates increased impact and shock resistance and reduces plastic shrinkage cracks in hardened concrete. Due to its good dispersion, even in dry mixtures, Fibercast®-500 6mm is particularly suitable for use in dry mortars and dry concretes. Fibercast®-500 6mm is alkali-resistant. Read more + Easy handling High tensile strength High impact and wear resistance

Download Data Sheet

Sika® Quellmittel 1

For the production of expanding mortar and expanding concrete Sika® Quellmittel 1 is used for the production of dry mortar, mortar and concrete with targeted volume expansion. Targeted volume expansion Introduction of finest pores Compensation of early shrinkage

Download Data Sheet

Sika® Einpresshilfe EH-1

Press-in aid for the production of injection grout mortar in accordance with DIN EN 445 - 447 Additive in powder form for the production of injection grout mortars, technical grouts as dry mortar or as construction site mixture. Expansion pressure to fill cavities Flowable consistency No water segregation

Download Data Sheet

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods